Jeep Xj Front Suspension Diagram
Re-use original spacer
Spring Cap
Coil Spring Spacer Bush Kit
Re-use original spacer
A=108mm B=65mm C=10mm
Vehicle Application Information:
- Raises vehicle approximately 10mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
- Front
- SPF1735-10K
- 2
- 1B
- $29.00
- More Info
- BUY NOW
Re-use original spacer
Spring Cap
Coil Spring Spacer Bush Kit
Re-use original spacer
A=108mm B=65mm C=15mm
Vehicle Application Information:
- Raises vehicle approximately 15mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF1735-15K
- 2
- 1B
- $30.00
- More Info
- BUY NOW
Re-use original spacer
Spring Cap
Coil Spring Spacer Bush Kit
Re-use original spacer
A=108mm B=65mm C=30mm
Vehicle Application Information:
- Re-use original spacer
- Raises vehicle approximately 30mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
- Front
- SPF1735-30K
- 2
- 1B
- $51.00
- More Info
- BUY NOW
remove outer shell
Bush, panhard rod
Panhard Rod To Diff Mount Bush Kit
remove outer shell
Vehicle Application Information:
- Diff end only (Chassis end is ball joint type)
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 90
- Part of kit: (x)
- Front
- SPF1081K
- 1
- 1T,1B
- $32.00
- More Info
- BUY NOW
Bush, shock absorber
Shock Absorber Upper Bush Kit
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
- Front
- SPF2755SK
- 1
- 4B
- $11.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Link Lower Bush Kit
Vehicle Application Information:
- Front & Rear
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Fitting Position: Front
- Part of kit: (x)
- Front
- SPF1139K
- 1
- 4B,2T
- $43.00
- More Info
- BUY NOW
Use when vehicle has no location washers
Bush, shock absorber
Sway Bar Link Upper Bush Kit
Use when vehicle has no location washers
Vehicle Application Information:
- Use when vehicle has no location washers
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
- Front
- SPF1150K
- 1
- 4B
- $36.00
- More Info
- BUY NOW
Use when vehicle / shocks have location washer
Bush, shock absorber
Sway Bar Link Upper Bush Kit
Use when vehicle / shocks have location washer
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
- Front
- SPF2755SK
- 1
- 4B
- $11.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 15, 16, 18, 19, 21, 22, 23, 24, 25, 26, 28, 29 & 30mm
Vehicle Application Information:
- 26mm ID
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
- Front
- SPF1138-26K
- 1
- 2B
- $37.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 15, 16, 18, 19, 21, 22, 23, 24, 25, 26, 28, 29 & 30mm
Vehicle Application Information:
- 30mm ID
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
- Front
- SPF1138-30K
- 1
- 2B
- $37.00
- More Info
- BUY NOW
Where tube is 66.5mm long, New outer shells supplied in this kit.
Control Arm-/Trailing Arm Bush
Trailing Arm Lower Bush Kit
Where tube is 66.5mm long, New outer shells supplied in this kit.
Vehicle Application Information:
- Where tube is 66.5mm long New outer shells supplied in this kit.
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
- Front
- SPF1264K
- 1
- 4S,4T,4B
- $250.00
- More Info
- BUY NOW
Must re-use original outer shell, Original inner tube is 66.5 long.
Control Arm-/Trailing Arm Bush
Trailing Arm Lower Bush Kit
Must re-use original outer shell, Original inner tube is 66.5 long.
Vehicle Application Information:
- Must re-use original outer shell Original inner tube is 66.5 long.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
- Front
- SPF2856K
- 1
- 4T,4B
- $145.00
- More Info
- BUY NOW
New outer shells supplied in kit
Control Arm-/Trailing Arm Bush
Trailing Arm Upper Bush Kit
New outer shells supplied in kit
Vehicle Application Information:
- New outer shells supplied in kit
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
- Front
- SPF1263K
- 1
- 4B,4T,4S
- $167.00
- More Info
- BUY NOW
Re-use original factory outer shell
Control Arm-/Trailing Arm Bush
Trailing Arm Upper Bush Kit
Re-use original factory outer shell
Vehicle Application Information:
- Re-use original factory outer shell
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
- Front
- SPF2842K
- 1
- 4T,4B
- $97.00
- More Info
- BUY NOW
63mm wide
Suspension Kit
Leaf Spring Bush Kit
63mm wide
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to "wander" all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 300
- Part of kit: (x)
- Rear
- KIT071K
- 1
- 1
- SuperPro Vehicle Kit
- $287.00
- More Info
- BUY NOW
65mm wide
Suspension Kit
Leaf Spring Bush Kit
65mm wide
These bushings are often overlooked when upgrading the suspension of a 4WD.
Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle.
It also causes the vehicle to "wander" all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads.
By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it!
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 300
- Part of kit: (x)
- Rear
- KIT084K
- 1
- 1
- SuperPro Vehicle Kit
- $252.00
- More Info
- BUY NOW
63mm wide original springs
Bushing, leaf spring
Spring Front Eye Bush Kit
63mm wide original springs
Vehicle Application Information:
- 63mm wide original springs
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
- Rear
- SPF0969K
- 1
- 4B,2T
- $167.00
- More Info
- BUY NOW
65mm wide after-market springs only
Bushing, leaf spring
Spring Front Eye Bush Kit
65mm wide after-market springs only
Vehicle Application Information:
- 65mm wide after-market springs only
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
- Rear
- SPF1737K
- 1
- 4B,2T
- $128.00
- More Info
- BUY NOW
63mm wide original springs
Bushing, leaf spring
Spring Rear Eye Bush Kit
63mm wide original springs
Vehicle Application Information:
- 63mm wide original springs
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
- Rear
- SPF0970K
- 1
- 2T,4B
- $72.00
- More Info
- BUY NOW
65mm wide after-market springs only
Bushing, leaf spring
Spring Rear Eye Bush Kit
65mm wide after-market springs only
Vehicle Application Information:
- 65mm wide after-market springs only
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
- Rear
- SPF1738K
- 1
- 2T,4B
- $71.00
- More Info
- BUY NOW
Bushing, leaf spring
Spring Shackle Upper Bush Kit
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
- Rear
- SPF1080K
- 1
- 4B,2T
- $81.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Link Lower Bush Kit
Vehicle Application Information:
- Front & Rear
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Fitting Position: Front
- Part of kit: (x)
- Rear
- SPF1139K
- 1
- 4B,2T
- $43.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 15, 16, 18, 19, 21, 22, 23, 24, 25, 26, 28, 29 & 30mm
Vehicle Application Information:
- 22mm ID
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
- Rear
- SPF1138-22K
- 1
- 2B
- $37.00
- More Info
- BUY NOW
Sway Bar Bush Kit
Sway Bar Mount Bush Kit
available Sizes 14, 15, 16, 18, 19, 21, 22, 23, 24, 25, 26, 28, 29 & 30mm
Vehicle Application Information:
- 24mm ID
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 45
- Part of kit: (x)
- Rear
- SPF1138-24K
- 1
- 2B
- $37.00
- More Info
- BUY NOW
Posted by: coltoncoltondinguse0269505.blogspot.com
Source: https://superpro.com.au/find/superpro-suspension-parts-and-poly-bushings-for-jeep-cherokee-1988-2001-xj-/cid-999501093
Post a Comment for "Jeep Xj Front Suspension Diagram"